DRIFT LINK AND DRIFT RELAY - PLATE 7
SECTIONS E AND S.
LINING UP NOTES
Zero Range Position.
Link Gear:-
(1) Coupling Slot towards back with the two
slides in coincidence (Change in Drift
Setting causes no movement of Slide).
(2) Dial graduation in coincidence with index marks on Slide.
Relay:-
(3) Coupling Pin vertical upwards with end of pushrod flush with bracket, pinion central, and Drift dial at Zero.

 

Copyright © 2013, Maritime Park Association.
All Rights Reserved.
Legal Notices and Privacy Policy
Version 3.00